Kyocera ECOSYS M3860idnf User Manual

4-17
Printing from PC > Printing Data Saved on the Printer
Printing Document from Quick Copy Box
Quick Copy feature facilitates additional prints of a document already printed. Activating Quick Copy and printing a
document using the printer driver allow the print data to be stored in the Quick Copy Job Box. When additional copies
are required, you can reprint the required number of copies from the touch panel. By default, up to 32 documents can be
stored. When power is turned off, all stored jobs will be deleted.
The following operations are possible:
Printing the Documents (page 4-17)
Deleting the Documents (page 4-18)
Printing the Documents
You can print the documents stored in the Quick Copy box. The procedure is as follows.
1
Display the screen.
1 Select [Job Box] in the home screen.
2 Select [Quick Copy/Proof and Hold].
3 Select the creator of the document.
2
Print the document.
1 Select the document to print > [Print]
2 Specify the number of copies to print as desired.
3 Select [OK].
Printing starts.
NOTE
• When the number of jobs reaches the limit, the oldest job will be overwritten by the new one.
• To maintain free space on the box, you can set the maximum number of stored jobs.
Quick Copy Job Retention (page 8-23)

Kyocera ECOSYS M3860idnf Specifications

General

Category	Printer
Type	Multifunction
Technology	Laser
Print Speed (Black)	60 ppm
Duplex Printing	Yes
Maximum Resolution	1200 x 1200 dpi
Warm-up Time	20 seconds or less
Copying	Yes
Copy Speed (Black, Normal Quality, A4)	60 cpm
Scanning	Yes
Optical Scanning Resolution	600 x 600 dpi
Duplex Scanning	Yes
Faxing	Yes
Fax Type	Super G3
Max Paper Size	A4
Maximum Output Capacity	250 sheets
Network Connectivity	Yes
Direct Printing	Yes
Internal Memory	2 GB
Processor Frequency	1.2 GHz
Operating System Compatibility	Windows, Mac OS, Linux
Print Margins	4 mm
Standard Paper Tray Media Types	Plain paper, Recycled paper
Standard Interfaces	Ethernet, USB 2.0
Display Diagonal	4.3 in
Scan Type	Flatbed & ADF