2-54
Installing and Setting up the Machine > Installing Software
Setting WIA Driver
Register this machine to the WIA Driver. Instructions are based on interface elements as they appear in Windows 10.
1
Display the screen.
1 Click [Start] button on the Windows and then select [Windows System], [Control Panel].
Click the search box in the Control Panel, and type "Scanner" in there. Select [View
scanners and cameras] in the search list. The Scanners and Cameras screen is
displayed.
2 Select the same name as this machine from WIA Drivers, and click [Properties].
2
Configure WIA Driver.
• In Windows 8.1, click [Search] in charms, and enter "View scanners and cameras" in
the search box. Select [View scanners and cameras] in the search list then the
Scanners and Cameras screen appears.
• In Windows 7, click [Start] button on the Windows and enter [Scanner] in [Program
and File Search]. Click [View scanners and cameras] in the search list then the
Scanners and Cameras screen appears.
1
2
5
3
4
(Network)
(USB)
1
2
3
4
1 Click the [Settings] tab.
2 Enter the machine IP addresses or host name.
3 When using SSL, select the checkbox beside
SSL.
4 Set units of measurement.
5 Click [OK].
1 Click the [Settings] tab.
2 Set the Compression Level.
3 Set units of measurement.
4 Click [OK].
To Next Page
Loading...
Need help?
General