Kyocera ECOSYS M3860idnf User Manual

8-11
Setup and Registration (System Menu) > System Menu
Original Settings
[System Menu/Counter] key > [Common Settings] > [Original Settings]
Configure settings for originals.
Item Description
Custom Original Size Set up frequently-used custom original size.
The custom size option is displayed on the screen to select original size.
Value
Metric
X: 50 to 356 mm (in 1 mm increments)
Y: 50 to 216 mm (in 1 mm increments)
Inch
X: 1.97 to 14.02" (in 0.01" increments)
Y: 1.97 to 8.50" (in 0.01" increments)
X=Length, Y=Width
Auto Detect Original Size (DP) Select whether to automatically detect originals of the document processor.
Auto Detect Select whether to enable automatic detection of original size.
Value: Off, On
System of Units Select metric or inch for the unit of original size detection.
Value: Metric, Inch
Legal/OficioII/
216 x 340 mm
As Legal, OficioII and 216 x 340 mm are similar in size, select either one of them for automatic
detection.
Value: Legal, Oficio II, 216 x 340 mm
NOTE
When [System of Units] is set to [Metric], this function will not be displayed.
Default Original Size Set the default original size.
Value
Metric: A4, A5, A6, B5, B6, Folio, 216 × 340 mm
Inch: Letter, Legal, Statement, Executive, Oficio II
Others: 16K
Default Original Size (Platen) Select a default size for the originals placed on the platen.
If [Off] is selected, a confirmation will be displayed before each job is processed.
Value
Off
Metric: A4, A5, A6, B5, B6, Folio, 216 × 340 mm
Inch: Letter, Legal, Statement, Executive, Oficio II
Others: 16K
NOTE
When [Auto Detect] is set to [Off], this function will not be displayed.
Horizontal

Kyocera ECOSYS M3860idnf Specifications

General

Brand	Kyocera
Model	ECOSYS M3860idnf
Category	Printer
Language	English