Kyocera ECOSYS M4132idn - Sending Documents in a Custom Box; Using Job Accounting; Configuring the Job Accounting Default Settings

xxxvi
> Menu Map
System Menu Settings Description Reference
Page
System/
Network
Network Protocol
Settings
DSM Scan Select whether to use DSM scan. 8-41
LDAP Select whether to use LDAP. 8-41
SNMP Select whether to communicate using
SNMP.
*1
8-41
SNMPv3 Select whether to communicate using
SNMPv3.
*1
8-41
HTTP Select whether to communicate using
HTTP.
*1
8-42
HTTPS Select whether to communicate using
HTTPS.
*1*2
8-42
IPP Selects whether to receive documents using
IPP.
*1
8-42
IPP over
SSL
Specifies whether to use IPP to receive
documents secured by SSL.
*1*2
8-43
RAWPort Selects whether to receive documents using
RAWPort.
*1
8-43
ThinPrint Select whether to use ThinPrint. 8-44
Enhanced
WSD
Set whether to use our proprietary web
services.
*1
8-45
Enhanced
WSD over
SSL
Set whether to use our proprietary web
services over SSL.
*1*2
8-45
eSCL Selects whether to receive scanned
documents using eSCL.
*1
8-45
eSCL over
SSL
Selects whether to receive scanned
documents using eSCL over SSL.
*1*2
8-46
Security
Settings
SSL Select whether to use SSL for
communication.
*3
8-46
IPP
Security
Select the IPP security level. This setup is
available when SSL is [On].
*3
8-46
HTTP
Security
Select the HTTP security level. This setup is
available when SSL is [On].
*3
8-46
SMTP
Security
Select the communication protocol in
accordance with the types of security
supported by the SMTP server.
8-46
POP3
Security
(User 1-3)
Select the communication protocol in
accordance with the types of security
supported by the POP3 server.
8-46
Ping Checks if communication with the
destination by entering the host name or IP
address of the destination is possible.
8-46