Using the Operation Panel 7-37
Page Set (Setting pagination)
In Page Set menus, you can set the number of copies, page orientation,
and other settings regarding pagination.
The options available in Page Set are as follows:
• Copies (Number of copies)
• Orientation (Print orientation)
• LF Action (Linefeed)
• CR Action (Carriage-Return)
• Wide A4 (Wide A4 pitch)
• XPS FitTo Page (Print area setting for XPS data)
• TIFF/JPEG Size (Print mode setting for TIFF/JPEG files)
1
Press while Print Settings > is displayed.
2
Press or repeatedly until >Page Set > appears.
Copies (Number of copies)
You can set the number of copies of each page to be printed for the
current interface.
1
Press while >Page Set > is displayed.
2
Press or repeatedly until >>Copies appears.
3
Press [OK]. A blinking cursor (_) appears.
4
Press or to increase or decrease, respectively, the value at the
blinking cursor. The number of copies can be set between 1 and 999.
Use and to move the cursor right and left.
5
When the desired size is displayed, press [OK].
6
Press [MENU]. The display returns to Ready.
Orientation (Print orientation)
You can select portrait (upright) or landscape (sideways) page
orientation.
1
Press while >Page Set > is displayed.
2
Press or repeatedly until >>Orientation appears.
To Next Page
Loading...
