7-38 Using the Operation Panel
3
Press [OK]. A blinking question mark (?) appears.
4
Select Portrait or Landscape using or .
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
LF Action (Linefeed)
This procedure instructs the printer what to do when it receives a
linefeed code (0AH).
• LF only: Linefeed is performed (Default).
• CR and LF: A linefeed and carriage return are performed.
• Ignore LF: The linefeed is ignored.
1
Press while >Page Set > is displayed.
2
Press or repeatedly until >>LF Action appears.
3
Press [OK]. A blinking cursor (_) appears.
4
Press or repeatedly until the desired linefeed action appears.
5
When the desired action is displayed, press [OK].
6
Press [MENU]. The display returns to Ready.
CR Action (Carriage-Return)
This procedure instructs the printer what to do when it receives a
carriage return code (0DH).
• CR only: A carriage-return is performed (Default).
• CR and LF: A linefeed and carriage return are performed.
• Ignore CR: The carriage-return is ignored.
1
Press while >Page Set > is displayed.
2
Press or repeatedly until >>CR Action appears.
3
Press [OK]. A blinking cursor (_) appears.
4
Press or repeatedly until the desired carriage-return appears.
5
When the desired action is displayed, press [OK].
6
Press [MENU]. The display returns to Ready.