Connecting and Printing 4-13
4
Click Submit.
E-mail
Send
Settings
E-mail Size Limit Enter the maximum size of E-mail that can be sent in kilobytes.
When E-mail size is greater than this value, an error message
appears and E-mail sending is cancelled. Use this setting if you
have set E-mail Size Limit for SMTP server. If not, enter a value
of 0 (zero) to enable E-mail sending regardless of the size limit.
Sender Address Enter the E-mail address of the person responsible for the
machine, such as the machine administrator, so that a reply or
non-delivery report will go to a person rather than to the
machine. The sender address must be entered correctly for
SMTP authentication. The maximum length of the sender
address is 128 characters.
Signature Enter the signature. The signature is free form text that will
appear at the end of the E-mail body. It is often used for further
identification of the machine. The maximum length of the
signature is 512 characters.
Function Default Change the function default settings in Common/Job Defaults
Settings page.
Setting Description
To Next Page
Loading...
