2P7/2R0/3PN
2-4-2
(2) Repetitive defects gauge
* : The repetitive marks interval may vary depending on operating conditions.
44.9 mm/1 3/4” Developer roller
36.8 mm/1
7/16” Registration roller
37.7 mm/1 1/2” Chager roller
94.2 mm/3
11/16” Drum/Press roller
109.9 mm/4
5/16” Heat roller
61.2 mm/2 7/16” Transfer roller
First occurrence of defect
To Next Page
Loading...
