Kyocera ECOSYS PA4000cx - How to Use Custom Box; Create a New Box

Operation on the Machine > Using Document Boxes
146
How to use Custom Box
Custom Box is a component box which you can create within the Document Box and store data for later retrieval.
You can create or delete a Custom Box.
The following operations are possible:
• Create a new Box
• Store documents
• Print documents
• Edit documents
• Delete the document.
NOTE
The operation on Custom Box can also be performed from Command Center RX.
➡ Command Center RX User Guide
Create a New Box
NOTE
• An optional SSD is required to use the Custom box.
• If user login administration is enabled, you can only change the settings by logging in with administrator
privileges.
If the user authentication screen appears, log in with a user who has the privilege to configure this setting. If
you do not know your login user name or password, please contact your administrator.
• If user login administration is enabled, log in with administrator privileges to perform the following operations.
They cannot be performed with user privileges.
- Creating a box
- Deleting a box of which the owner is another user
1
Display the screen.
Select the [Document Box] key.
NOTE
If the box initial screen is set to the Job Box, display the Custom Box screen.
[Document Box] key > [Back] key > [ ][ ] key > [Custom Box] > [OK] key
2
Create a new box.
1 Select [Add].