EasyManua.ls Logo

Kyocera ECOSYS PA4000cx - Basic; Restart Network

Kyocera ECOSYS PA4000cx
427 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Menu > Optional Network
224
Basic
[Menu] key > [ ][ ] key > [Optional Network] > [OK] key > [ ][ ] key > [Basic] > [OK] key
NOTE
This function will be displayed when the optional Network Interface Kit (IB-50/IB-51) is installed.
Restart Network
Item Description
[TCP/IP Settings] For the setting values, refer to the following:
[TCP/IP Settings][TCP/IP Settings] (page 205)
Bonjour (page 212)
[NetWare] Receives documents using NetWare.
Network Interface Kit Operation Guide
Value: [Off], [On]
[AppleTalk] Set whether to receive documents using the AppleTalk. The setting will
be changed after restarting the device or the machine’s network.
Value: [Off], [On]
[IPSec] For the setting values, refer to the following:
Off/On (page 212)
[LAN Interface] Select the LAN interface. The setting will be changed after restarting the
device or the machine’s network.
Value: [Auto], [10BASE-Half], [10BASE-Full], [100BASE-Half],
[100BASE-Full], [1000BASE-T]
NOTE
This function will be displayed when the optional Network Interface Kit is
installed.
[MACAddressFilter] Set whether to use MAC Address Filter.
Network Interface Kit Operation Guide
Value: [Off], [On]
Item Description
[Restart Network] Restarts the network.

Table of Contents

Other manuals for Kyocera ECOSYS PA4000cx

Related product manuals