System Menu > Security
236
Security
Configures security settings.
Network Security
[Menu] key > [ ][ ] key > [Security] > [OK] key > [ ][ ] key > [Network Security] > [OK] key
[SecurityQuickSet]
Item Description
[SecurityQuickSet] Select security settings from levels 1 to 3 that are close to your
environment, and change (customize) the functions as needed.
Value
[Level 1]
The factory default setting.
[Level 2]
The security function of the network will change.
[Level 3]
All functions that protect the machine are enabled, and functions
that do not protect the machine are disabled.
NOTE
• This function can be set only when logged in with administrator
privileges.
âž¡ Log in as Machine Administrator or Administrator (page 75)
• Restart the device or network after selecting a level for the settings to
take effect.
âž¡ Restart (page 246)
âž¡ Restart Network (page 224)
• For more information on each security level setting, refer to the
following:
âž¡ Security Quick Setup Function List (page 402)
To Next Page
Loading...
Need help?
General