System Menu > Network
206
IMPORTANT
• When setting the Auto-IP, enter "0.0.0.0" in IP Address.
• After changing the setting, restart the network or turn the machine OFF and then ON.
[IPv6 Setting]
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is [On].
Item Description
[IPv6 Setting] Select whether to use IPv6.
Value: [Off], [On]
NOTE
Selecting [On] displays IP address in [Link Local] after restarting the
network.
[Manual Settings] Manually specify the IP address, prefix length, and gateway address of
TCP/IP (IPv6).
Value
[IP Address]
128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
[Prefix Length]
0 to 128
[Default Gateway]
128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
NOTE
• This function is displayed when [IPv6 Setting] is set to [On].
• To enter [Default Gateway], set [RA(Stateless)] to [Off].
[RA(Stateless)] Select whether to use RA (Stateless).
Value: [Off], [On]
NOTE
• This function is displayed when [IPv6 Setting] is set to [On].
• Selecting [On] displays [IP Address 1] - [IP Address 5] to after
restarting the network.
To Next Page
Loading...
