Troubleshooting > Troubleshooting
342
NOTE
If Auto Error Clear is set to [On], the process will resume automatically after a set period of time. For details, refer
to the following:
➡ Auto Err. Clear (page 230)
"Performing" is displayed
The machine is in adjustment mode to maintain its quality. Please wait.
"Cannot connect to Authentication Server." is displayed
Does the machine time match the server’s time?
• Set the machine time to match the server’s time
➡ Setting Date and Time (page 44)
Is it properly registered with the authentication server?
• Enable User Login Administration.
➡ Enable User Login Administration (page 249)
• Set the network authentication server.
- Check the connection status with the server.
- Confirm that the computer name and password for the authentication server are correct.
Is the machine connected to the network correctly?
➡
Connecting LAN Cable (page 34)
➡ Network Setup (page 45)
NOTE
If Auto Error Clear is set to [On], the process will resume automatically after a set period of time. For details, refer
to the following:
➡ Auto Err. Clear (page 230)
To Next Page
Loading...
