Troubleshooting > Adjustment/Maintenance
360
It is not possible to enter values with the numeric keypad.
3 Repeat steps 3-4 to correct Cyan and Yellow.
Performing Color Registration Procedure (Detailed Registration)
1
Load paper.
IMPORTANT
• Load the paper with the print side facing up.
• After removing new paper from its packaging, fan out the paper before loading it in the cassettes.
➡ Precaution for Loading Paper (page 90)
• Before loading the paper, be sure that it is not curled or folded. Paper that is curled or folded may cause
paper jams.
• Ensure that the loaded paper does not exceed the level indicator (see illustration above).
• If paper is loaded without adjusting the paper length guide and paper width guide, the paper may skew
or become jammed.
2
Display the screen.
[Menu] key > [ ][ ] key > [Adjust/Maint.] > [OK] key > [ ][ ] key > [Color Regist.] > [OK] key >
[ ][ ] key > [Detail] > [OK] key
3
Print the chart.
[ ][ ] key > [Print Chart] > [OK] key > [Yes]
A chart is printed. On the chart, for each of M (magenta), C (cyan) and Y (yellow), charts for H-1 to 5 and V-1
to 5 are printed.
After printing, return to the Color Printing Position Correction Details menu.
To Next Page
Loading...
