Installing and Setting up the Machine > Default Settings of the Machine
47
Configuring the Wireless Network
When the optional Wireless Network Interface Kit (IB-37, IB-38, or IB-51) is installed on the machine and the
connection settings are configured, it is possible to print in a wireless network (wireless LAN) environment.
âž¡ IB-37/IB-38 <Wireless network interface (USB: 5GHz/2.4GHz)> (page 378)
âž¡ IB-51 <Wireless network interface (KUIO: 2.4GHz)> (page 378)
The configuration methods are as follows:
NOTE
When you want to switch to the network interface other than Wired (default) after installing an optional Network
Interface Kit (IB-50) and a Wireless Network Interface Kit (IB-37/IB-38/IB-51), select the desired setting on [Primary
Network].
âž¡ Primary Network (page 219)
Configuration Method Description
Configuring the Connection from
the Operation Panel on This
Machine
Use Wi-Fi Settings or Wireless Network to configure the network in
details from System menu.
âž¡ Wi-Fi Settings (page 202)
âž¡ Wireless Network (page 222)
Setting the Connection by Using
the Wi-Fi Setup Tool
This is a tool that can be downloaded from Download Center
(https://kyocera.info/). You can configure the connection according to
the instructions provided by the wizard.
âž¡ Wired Connection with LAN Cable Using Wi-Fi Setup Tool (page 48)
Setting the Connection by Using
the Setup Utility of IB-51
This is the setup tool included in the CD of IB-51. You can use it on both
Windows and Mac OS.
âž¡ IB-51 Operation Guide
Configuring Connections on the
Web Page
For the IB-37/IB-38, the connection can be set on the Command Center
RX.
âž¡ Command Center RX User Guide
For the IB-51, the connection can be set on the dedicated Web page.
âž¡ IB-51 Operation Guide
To Next Page
Loading...
Need help?
General