System Menu > Print Settings
196
[Print Quality]
Set the printing quality.
Value Description
[KIR] Select the default KIR (smoothing) setting.
Value: [Off], [On]
[EcoPrint] EcoPrint conserves toner when printing. This is recommended for test
copies where faded printing is not a problem.
Value: [Off], [On]
[EcoPrint SaveLvl] Select the default Toner Save Level (EcoPrint).
Value: 1 (low), 2, 3, 4, 5 (high)
Raising the level reduces toner consumption, but image quality falls.
[Gloss Mode] Gloss Mode increases the effect of glossiness in printing. However,
printing takes longer time.
Value: [Off], [On]
IMPORTANT
This function is not available when [Labels] or [Transparency] is selected
as the paper type setting.
➡ Paper Settings (page 188)
Depending on the paper used, printing in gloss mode may cause curl in
paper. To reduce curl, try using thicker paper.
[Print Resolution] Set the resolution used for printing.
Value: 600 dpi, 1200 dpi
NOTE
Settings that are received from the printer driver have priority over the
operation panel settings.
To Next Page
Loading...
