System Menu > Network
201
Wi-Fi Direct Set
[Menu] key > [ ][ ] key > [Network] > [OK] key > [ ][ ] key > [Wi-Fi Direct Set] > [OK] key
Set Wi-Fi Direct.
NOTE
This function is displayed when the Wireless Network Interface Kit (IB-37 or IB-38) is installed.
The Wireless Network Interface Kit is an option for some models. Contact your dealer or our sales or service
representatives for detail.
Item Description
[Wi-Fi Direct] Select whether to use Wi-Fi Direct.
Value: [Off], [On]
[Device Name] Specify the device name.
NOTE
• Up to 32 characters can be entered.
• This function is displayed when [Wi-Fi Direct] is set to [Enable].
[IP Address] Check the IP address of the machine.
➡ [TCP/IP Settings][TCP/IP Settings] (page 208)
NOTE
This function is displayed when [Wi-Fi Direct] is set to [Enable].
[Auto Disconnect] Automatically disconnect devices connected through Wi-Fi Direct.
Value: [Off], [On]
NOTE
• If you select [On], set the waiting time for automatic disconnection.
• This function is displayed when [Wi-Fi Direct] is set to [Enable].
[Persistent Group] Set whether Wi-Fi Direct connection as Persistent Group (information for
the connection is kept even if the power is turned off).
Value: [Off], [On]
NOTE
This function is displayed when [Wi-Fi Direct] is set to [Enable].
[Frequency Band] Set the frequency band to be used.
Specify when using IB-37/IB-38.
Value: [2.4 GHz], [5 GHz]
To Next Page
Loading...
