User Authentication and Accounting (User Login, Job Accounting) > Enable User Login Administration
249
Enable User Login Administration
This enables user login administration.
1
Display the screen.
1 [Menu] key > [ ][ ] key > [User/Job Account] > [OK] key
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2 [ ] [ ] key > [User Login Set.] > [OK] key
2
Configure the settings.
• Select [Off] to disable user login administration.
• If [Netwk Authentic.] is selected, set [Netwk Auth. Set.].
➡ Server Settings (page 257)
NOTE
If you cannot login because of the setting of the machine, login with any administrator registered in the local
user list and correct the settings.
To Next Page
Loading...
