System Menu > Device Common
226
Buzzer
[Menu] key > [ ][ ] key > [Device Common] > [OK] key > [ ][ ] key > [Buzzer] > [OK] key
Set options for buzzer sound during the machine operations.
RAM Disk Setting
[Menu] key > [ ][ ] key > [Device Common] > [OK] key > [ ][ ] key > [RAM Disk Setting] > [OK] key
NOTE
Displayed when the optional SSD is installed.
Create a RAM disk and set its capacity.
You can print print data from the job box by creating a RAM disk.
Value
[RAM Disk Mode]:[Off], [On]
[RAM Disk Size]: Setting range varies depending on size of onboard memory and optional memory usage.
IMPORTANT
After changing the setting, restart the system or turn the machine OFF and then ON.
[Time Zone] Set the time difference from GMT. Choose the nearest listed location
from the list.
➡ Setting Date and Time (page 44)
[Summer Time] If you select a region that utilizes summer time, configure settings for
summer time.
➡ Setting Date and Time (page 44)
Item Description
[Key Conf. Buzzer] Emit a sound when the operation panel keys are selected.
Value: [Off], [On]
[Job Finish] Emit a sound when a print job is normally completed.
Value: [Off], [On]
[Ready Buzzer] Emit a sound when the warm-up is completed.
Value: [Off], [On]
[Warning] Emit a sound when errors occur.
Value: [Off], [On]
[Keyboard Confirm] Emit a sound to confirm key presses with a sound.
Value: [Off], [On]
Item Description
To Next Page
Loading...
