Troubleshooting > Troubleshooting
319
Are there a mixture of inaccessible addresses?
If you have configured wired and Wi-Fi networks with name resolution, you may have a mix of IP addresses
(private addresses) on the other inaccessible network.
IMPORTANT
Only one host name and one domain name can be used on this machine. Please consider this limitation when
setting the network operation.
1
[Menu] key > [ ] [ ] key > [Network] > [OK] key > [ ] [ ] key > [Primary
Network]
Select Wi-Fi, Wired or Optional Network as the network to use without restrictions.
➡ Primary Network (page 219)
2
[Menu] key > [ ] [ ] key > [Network] > [OK] key > [ ] [ ] key > [ProtocolSettings]
Please [Enable] either [Wired Network] or [Wi-Fi] and [Disable] the other.
➡ ProtocolSettings (page 212)
3
In Command Center RX, change the settings for name resolution of NetBEUI, DNS,
etc., or change the network environment settings.
➡ Command Center RX User Guide
To Next Page
Loading...
