Troubleshooting > Troubleshooting
347
"Refreshing drum…" is displayed
The machine is in adjustment mode to maintain quality.
Please wait.
"Please wait. Regulating the temperature…" is displayed
The machine is in adjustment mode to maintain quality.
Please wait.
"Overwriting." is displayed
You can overwrite the unnecessary data that remains on the SSD automatically. Please wait.
"SSD error." is displayed
An error has occurred on the SSD.
The job is canceled. Select [OK].
The following error code is displayed:
• 01: The amount of data that can be saved at once has been exceeded. Restart the system or turn the power
OFF/ON. If the error still occurs, divide the file into smaller files.
If the error still persists, the SSD is damaged. Execute [Initialization].
• 04: Insufficient space remaining on SSD. Move data or delete unneeded data.
NOTE
Please note that the data stored on the SSD will be deleted when system initialization is performed.
"Error occurred." is displayed
System error has occurred.
Follow the instruction displayed on the screen.
To Next Page
Loading...
