Installing and Setting up the Machine > Default Settings of the Machine
50
3
Configure the settings.
1 [Do not use automatic configuration] > [Next] > [Next]
2 [Use LAN cable] > [Next] > [Next]
3 [Easy setup] > [Next]
The machine is detected.
NOTE
• Only one machine can be searched using Wi-Fi Setup Tool. It may take times to search the machine.
• If the machine is not detected, select [Advanced setup] > [Next]. Select [Express] or [Custom] as device
discovery method and specify the IP address or host name to search the machine.
4 Select the machine > [Next]
5 Select [Use the device settings.] on [Authentication mode], and enter the administrator's login user
name and password.
6 Configure the communication settings > [Next]
7 Change the settings of access point as necessary > [Next]
The network is configured.
To Next Page
Loading...
