Kyocera ECOSYS PA4500cx - Page 61

Installing and Setting up the Machine > Default Settings of the Machine
54
Setting Wi-Fi Direct
When the Optional Wireless Network Interface Kit (IB-37/IB-38) is installed on the machine and the connection
settings are configured, this enables you to print from the Wi-Fi Direct environment. The configuration methods
are as follows:
• Configuring the connection from the operation panel on this machine
• Configuring the connection by using push button
Connecting to Computers or Mobile Devices that Support Wi-Fi Direct
1
Display the screen.
[Menu] key > [ ][ ] key > [Network] > [OK] key > [ ][ ] key > [Wi-Fi Direct Set] > [OK] key > [ ][ ]
key > [Wi-Fi Direct] > [OK] key
2
Configure the settings.
[ ][ ] key > [On] > [OK] key
3
Restart the network.
[Menu] key > [ ][ ] key > [Network] > [OK] key > [ ][ ] key > [Restart Network] > [OK] key > [Yes]
4
Specify the machine name from the computer or mobile device.
If a confirmation message appears on the operation panel of the machine, select [Yes].
The network between this machine and the computer or mobile device is configured.