EasyManuals Logo

Kyocera FS-1370DN Service Manual

Kyocera FS-1370DN
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
1.Installation Precautions
WARNING
Do not use a power supply with a voltage other than that specified. Avoid multiple connections to
one outlet: they may cause fire or electric shock. When using an extension cable, always check
that it is adequate for the rated current. .............................................................................................
Connect the ground wire to a suitable grounding point. Not grounding the copier may cause fire or
electric shock. Connecting the earth wire to an object not approved for the purpose may cause
explosion or electric shock. Never connect the ground cable to any of the following: gas pipes,
lightning rods, ground cables for telephone lines and water pipes or faucets not approved by the
proper authorities. ............................................................................................................................
CAUTION:
Do not place the copier on an infirm or angled surface: the copier may tip over, causing injury. .......
Do not install the copier in a humid or dusty place. This may cause fire or electric shock. ................
Do not install the copier near a radiator, heater, other heat source or near flammable material.
This may cause fire. .........................................................................................................................
Allow sufficient space around the copier to allow the ventilation grills to keep the machine as cool
as possible. Insufficient ventilation may cause heat buildup and poor copying performance. ...........
Always handle the machine by the correct locations when moving it. ...............................................
Always use anti-toppling and locking devices on copiers so equipped. Failure to do this may cause
the copier to move unexpectedly or topple, leading to injury. ...........................................................
Avoid inhaling toner or developer excessively. Protect the eyes. If toner or developer is acciden-
tally ingested, drink a lot of water to dilute it in the stomach and obtain medical attention immedi-
ately. If it gets into the eyes, rinse immediately with copious amounts of water and obtain medical
attention. ......................................................................................................................................
Advice customers that they must always follow the safety warnings and precautions in the copier’s
instruction handbook. .....................................................................................................................

Table of Contents

Other manuals for Kyocera FS-1370DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera FS-1370DN and is the answer not in the manual?

Kyocera FS-1370DN Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)7 s
Print speed (black, normal quality, A4/US Letter)35 ppm
Memory typeDDR
Memory slots1
Processor model440F5
Processor familyPowerPC
Maximum internal memory1152 MB
Sound power level (standby)30 dB
Sound pressure level (printing)55 dB
Sound pressure level (quiet mode)49 dB
Total input capacity300 sheets
Maximum input capacity800 sheets
Total number of input trays2
Maximum number of input trays4
Multi-Purpose tray input capacity50 sheets
Mobile printing technologiesNot supported
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)11 W
Power consumption (printing)554 W
Power consumption (PowerSave)5.5 W
Printing colorsBlack
Maximum duty cycle50000 pages per month
Recommended duty cycle2800 pages per month
Page description languagesEpson LQ, IBM ProPrinter, PCL 5e, PCL 6, PJL, PostScript 3
DisplayLCD
CertificationGS, TUV, CE
Product colorBlack, White
Custom media width70 - 215.9 mm
Maximum print size216 x 356 mm
Custom media length148 - 356 mm
Duplex media weight60 - 105 g/m²
Paper tray media typesPlain paper
Paper tray media weight60 - 120 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Standard interfacesEthernet, USB 2.0
Server operating systems supportedWindows 2000 Advanced Server, Windows 2000 Server, Windows MultiPoint Server 2011, Windows SBS 2011 Essentials, Windows SBS 2011 Standard, Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64, Windows Server 2012
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth393 mm
Width375 mm
Height267 mm

Related product manuals