2L0-1
1-6-6
13. Turn printer power on.
14. When message display (1) is displayed to
detect firmware in the memory card.
15. Message display (2) is displayed during
downloading.
16. When message display (3) is displayed to
indicate downloading is finished.
Figure 1-6-10
17. Turn printer power off.
18. Remove the memory card from memory
card slot.
19. Refit the optional interface slot cover.
20. Turn printer power on.
21. Print the status page to check that the firm-
ware version has been updated.
(See page 1-3-7)
Figure 1-6-11
(2)
(1)
supervisor mode
CF-card reading
supervisor mode
(3)
2L0_1000.000.024
[E1F9]
Message display
Supplement (Normally: 00)
Classification (Normally: 0)
Product code
2L0: This printer
Checksum
Update history
Build number
Firmware category
10: Engine
30: System (Main)
31: System (BROM)
Option interface
slot cover
Screw
Screw
Memory card slot
Memory card
To Next Page
Loading...
