EasyManuals Logo

Kyocera FS-9500DN Service Manual

Kyocera FS-9500DN
193 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #97 background imageLoading...
Page #97 background image
1-5-27
Code Contents
Remarks
Causes Check procedures/corrective measures
FS-9120DN/9520DN
*: Optional
8480
F0
F010
F020
F030
F040
F080
Booklet stitcher* broken punch
power source wire problem
Main controller PWB error
The operation breakdown occurs be-
tween main controller PWB and op-
eration panel PWB during 30 sec-
onds.
System DIMM checksum error
Checksum for the system DIMM PWB
that holds the system program is
wrong.
Memory check error
•Access to the expanding memory
(DIMM) or RAM on the main control-
ler PWB is unobtainable.
Main controller PWB system error
The error concerned with the system
occurred except self diagnostic codes
F0 (F010) conditions.
Main - Engine controller PWBs com-
munication error
•The communication breakdown oc-
curred between main controller PWB
and engine controller PWB during 30
seconds.
Flash ROM checksum error
Check result is not correct about flash
ROM checksum of engine controller
PWB.
A broken punch
power source wire
problem is de-
tected.
Defective main
controller PWB.
Defective operator
panel PWB.
Defective engine
controller PWB .
Defective harness
between engine
controller PWB
and operator
panel PWB, or
poor contact of
the connector ter-
minals.
Defective system
DIMM PWB.
Defective main
controller PWB.
Defective main
controller PWB.
Defective expan-
sion memory
(DIMM).
Defective main
controller PWB.
Defective engine
controller PWB.
Defective main
controller PWB.
Defective engine
controller PWB.
See the booklet stitcher service manual.
Replace the main controller PWB. See
page 1-6-23.
Replace the operator panel PWB. See
page 1-6-27.
Replace the engine controller PWB. See
page 1-6-24.
Check the continuity of the harness. Check
the insertion of connectors.
Replace the system DIMM PWB.
Replace the main controller PWB. See
page 1-6-23.
Replace the main controller PWB. See
page 1-6-23.
Replace the expansion memory (DIMM).
Replace the main controller PWB. See
page 1-6-23.
Replace the engine controller PWB. See
page 1-6-24.
Replace the main controller PWB. See
page 1-6-23.
Replace the engine controller PWB. See
page 1-6-24.

Other manuals for Kyocera FS-9500DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera FS-9500DN and is the answer not in the manual?

Kyocera FS-9500DN Specifications

General IconGeneral
BrandKyocera
ModelFS-9500DN
CategoryAll in One Printer
LanguageEnglish

Related product manuals