Kyocera FS-C2026MFP

Appendix-5
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2 The System menu appears.
3 Press the U or V key to select [Op Function].
4 Press the OK key. The Op Function menu
appears.
5 Press the U or V key to select desired application.
6 Press the OK key. The selected application menu
appears.
7 Press the U or V key to select [Official] or [Trial].
If you select [Official], the License key entry
screen is displayed. Enter the License key using
the numeric keys and press the OK key.
To use the application as a trial, press [Trial]
without entering the License key.
If you select [Trial] and press the OK key, the
confirmation screen appears. Press [Yes] (the
Right Select key).
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Op Function: a b
*********************
2 UG-33 T
[ Menu ]
1 ID-Card g
Licence On: a b
*********************
2 Trial
1 *Official
Test the optional
function for a
limited time.
Are you sure?
[ Yes ] [ No ]