Kyocera FS-C2026MFP

Appendix-6
8 Licensed. is displayed and the screen returns to
the Op Function menu.
CAUTION: If you change the date/time while using an application, you will no longer be able to use the
application.
Checking Application Details
Use the procedure below to check the details of an application.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2 The System menu appears.
3 Press the U or V key to select [Op Function].
4 Press the OK key. The Op Function menu
appears.
5 Press [Menu] (the Left Select key).
6 Press the U or V key to select [Detail]. The detail
setting screen appears.
You can now view detailed information on the
selected application.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Op Function: a b
*********************
2 UG-33 T
[ Menu ]
1 ID-Card g
Menu: a b
*********************
2 Detail
1 Licence On