2KT/2KV
1-3-12
Developer
Refresh
Performing developer refresh
Description
The laser output of the image data for developer refreshing is carried out, and operation
to exposure, developing, and primary transfer is performed by 10 pages (paper is not
fed).
Purpose
To perform cleaning when faulty images occur and a line appears longitudinally.
Method
1. Enter the Service Setting menu.
2. Select [DEV-CLN] using the cursor up/down keys.
3. Press the OK key.
4. Press the OK key. Developer refresh is performed.
Figure 1-3-5
Service items Description
A4 paper size
200 mm
33 mm
Toner image on the transfer belt
To Next Page
Loading...
