Kyocera KM-1530 - Page 105

Job
User Guide 8-6
When initially printing a job, follow the steps below to print a barcode representing
the job ID on each page or on the cover page only.
By simply reading the barcode with the barcode reader, you can reprint either a page
or the entire job.
Print a Barcode on a Print Job
1
From the application’s Print dialog box, open the Properties. (Select Print from the
File menu). 1
2
Open the Properties dialog box and click the Job tab. 2
3 Select the Job storage (e-MPS) check box. 3
4
Select Temporary or Permanent. 4
5
Click Options to open the Barcode Options dialog box. 5
6
Select the Barcode check box. Select Print on first page only or Print on all
sheets. 6
7
If you want to print the job ID as characters with the barcode, as shown in the
diagram below, select the Print Barcode ID check box. 7
Note: Some models do not support the barcode feature.
8
From the Position list, select the barcode position on the page. From the
Orientation list, select the direction of the barcode. 8
9
Click OK. 9
{28L016T50}
{28L016T50}
Barcode ID