Finishing
5-4 KX Driver
• If the document data is small enough that it will not extend beyond the edge of
the paper when the gutter is increased, clear the Reduce image to fit check
box.
When you want to change the page size (for example, to enlarge an A4-size
brochure for printing on A3 paper), refer to Print Sizes on page 3-3.
Staple
The Staple feature is available on printing systems with an optional finishing device
installed. If a Booklet stitcher is installed, the Booklet printing feature is available.
For further details, refer to Booklet on page 4-1.
After installation, optional equipment must be selected in the printer driver in the
Device Settings tab. For further details, refer to Installing Optional Devices on
page 2-1.
Note: Staple and Separation features cannot be used together.
If Printer default is selected as the Destination in the Basic tab, the selection of an
option in the Finishing tab results in the automatic selection of a destination
compatible with that finishing option. The destination is automatically updated to the
first available output tray that supports the selected finishing option.
Staple, Punch, and Separation > Offset jobs each select the Destination
automatically. If Staple > Booklet [fold] is selected, Booklet in the Layout tab is
also automatically selected. If he finishing option is changed, the Destination
selection will not be affected.
Using the Stapler
1
From the application’s Print dialog box, open Properties. (Select Print from the File
menu, and select Properties.) 1
To Next Page
Loading...
