Windows 98 - USB, Custom Installation
User Guide 1-11
7
In Confirm Settings click Install. 7
Note: If the Found New Hardware Wizard appears, click Cancel. If the Hardware
Installation warning dialog box appears, click Continue Anyway.
The installation of the printer is now complete. If prompted, restart your system.
Windows 98 - USB, Custom
1
Ensure that your printer and computer are connected using the USB cable. 1
2
Select Custom Mode. 2
3
For Custom Mode select Driver or Utilities or both. Later in the installation you can
select which driver and utilities to install. Choices for Driver include the KX Driver and
the mini Driver. Choices for Utilities are Fonts, the Kyocera Scanner Driver, KMnet
for Clients, and Driver Deleter. 3
4
In the Connection Type page select Universal serial bus (USB), and then click
Next. 4
To Next Page
Loading...
