Publishing
User Guide 7-4
Edit Cover Printing Options
1
From the Media for cover list, select the media type or source cassette for the front
and back covers. When you choose the media type, a source cassette matching that
media is automatically selected. 1
Note: Heavy, thin, or other special papers must be supplied from the MP tray.
2
Load the paper for the front and back cover in the paper cassette selected in step 1. 2
3
Click OK to return to the Print dialog box 3
4
Click OK to start printing. 4
Page Insert
You can insert a preprinted page or a page of a different paper type before a
designated page. You can also print on the inserted paper. If a duplex unit is installed,
you can also print on the reverse of the inserted paper.
Although the Page insert and Cover mode may be used simultaneously, they
cannot be combined with Transparency interleaving (described in Transparency
Interleaving on page 7-6).
Insert Page Printing
1
From the application’s Print dialog box, open the Properties. (Select Print from the
File menu and select Properties). 1
2
In the Properties dialog box, click the Publishing tab. 2
Front and Back
5Back Inside
5Back Outside
Prints on both sides of the back cover and inserts a
blank front cover.
Front and Back
5Front Outside
5Front Inside
5Back Inside
5Back Outside
Prints on both sides of the front and back covers.
Check Box Selection Cover Insertion Type
To Next Page
Loading...
