Kyocera KM-1530

Printer Properties
2-7 KX Driver
In GDI compatible mode, vector graphics are rasterized for printing as bitmap
images. Use the GDI compatible mode option to improve the graphic output quality
created by the application. Due to memory restrictions, this feature is not available
in certain printing environments.
3
Settings is available when the PDL is set to KPDL or PDF, and, on some models,
when PCL XL is selected. 3
PCL XL
KPDL
PDF
(Portable Document Format)
Note: PDF is not supported
by Windows 95/98/Me.
Lets you print or save documents from multiple sources to
Adobe PDF format. The PDF format is independent of the
operating system and application software used to create
documents.
Output to PDF is a plug-in that lets you print or save
documents from multiple sources to Adobe PDF format.
For information about installing the Output to PDF plug-in,
see Installing Optional Components on page 1-21.
• Use as an alternative to existing commercial
applications for creating PDF documents.
• Documents saved as PDF retain their original
appearance, and can be viewed and printed with the
free Adobe Reader on Windows, Mac OS, and UNIX
platforms.
Note: With PDF selected as the Page description
language, only a limited set of driver options are available.
PDF is not supported by Windows 95/98/Me.
Option Description
Option Description
Disable auto media type
switching
A check box control for disabling automatic switching of
the paper source.
If the selected cassette runs out of paper:
Cleared: The printing system will automatically switch to
another cassette loaded with the same page size and
media type.
Selected: Printing will stop until you load more paper into
the cassette.
Option Description
Allow data passthrough Data passthrough reduces errors when printing complex
jobs from applications that use PostScript formatting.