Printing Basics
User Guide 3-11
• When using a network port, select Enable manual duplex on network port in
the Compatibility Settings dialog box, accessed from the Device Settings tab.
Manual Duplex cannot be used on a network port in Windows 9x. See
Compatibility Settings on page 2-14 for instructions on changing compatibility
settings.
•The Source selection must be Cassette 1 or Cassette 2.
Print on Both Sides
1
In the Basic tab, select Cassette 1 or Cassette 2 from the Source list. 1
2
Select the Print on both sides (manual duplex) check box. 2
3
Select Flip on Long Edge or Flip on Short Edge. 3
4
Select Print manual duplex instructions to print an instruction sheet. Follow the
printed instructions for placing the pages back into the cassette after the first side is
printed. 4
- OR -
To Next Page
Loading...
