FAX Operation (Basic)
3-4 OPERATION GUIDE
Direct Transmission (When originals are placed in the document
processor)
After the telephone line has connected with the receiving system, scanning
of the originals placed in the document processor starts. When multiple-
page originals are placed, each page is scanned after the previous one is
sent.
Direct Transmission (When originals are placed on the glass
surface)
This method is suitable for sending book originals that cannot be placed in
the document processor. After the telephone line has connected with the
receiving system, the originals placed on the glass surface are scanned
and sent.
NOTE: When continuous scan is set, you can continue with scanning of
a next original after an original on the glass surface has been sent. Every
time one page is scanned, you perform an operation to allow continued
scanning.
Placing Originals
3
Place the originals on the glass surface or in the optional document
processor. Refer to the machine’s Operation Guide for placing originals.
To Next Page
Loading...
