2LK/2LN/2LM/2LC
1-3-38
U035 Setting the printing area for folio paper
Description
Changes the printing area for copying on folio paper.
Purpose
To prevent cropped images on the trailing edge or left/right side of copy paper by setting the
actual printing area for folio paper.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting value using the +/- keys.
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description Setting range Initial setting
Length Length 330 to 356 mm 330
Width Width 200 to 220 mm 210
To Next Page
Loading...
