Kyocera TASKalfa 3050ci - Page 133

2LK/2LN/2LM/2LC-2
1-3-39
U037 Checking the operation of the fan motors
Description
Drives each fan motor.
Purpose
To check the operation of each fan motor.
Method
1. Press the start key.
2. Select the fan motor to be operated.
3. Press the start key. The operation starts.
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description Group
Fuser Cooling Fuser rear fan motor (FURFM) is turned on B
DLP Rear
Exhaust motor 1and 2 (EXFM1, 2) is turned on A
LSU Cooling LSU fan motor (LSUFM) is turned on B
Belt Cooling Belt fan motor 1and 2 (BLFM1, 2) is turned on A
Exit Cooling Eject front fan motor (EFFM) is turned on B
Toner Toner fan motor 1and 2 (TFM1, 2) is turned on A
Low Volt Power source fan motor (PSFM) is turned on A
Exit Rear Cooling Eject rear fan motor (EFRM) is turned on B
IH PWB IH fan motor (IHFM) is turned on A
IH Coil Fuser front fan motor (FUFFM) is turned on A
DLP Front
Developer fan motor 1and 2 (DEVFM1, 2) is turned on A
Conv Edge Fuser fan motor 1and 2 (FUFM1, 2) is turned on A
Fuser Edge Fuser edge fan motor 1and 2 (FUEFM1, 2) is turned on -
GroupA Fan motors of group A are turned on
GroupB Fan motors of group B are turned on