Kyocera TASKalfa 3050ci - Color Toner Empty Action; Function Defaults

2LK/2LN/2LM/2LC-2
1-4-22
6100 DF paper entry sensor non
arrival jam
DF paper entry sensor (DFPES) is not turned on
even if a specified time has elapsed after the
machine eject signal was received (4000-sheet fin-
isher).
K
6101 DF paper entry sensor (DFPES) is not turned on
even if a specified time has elapsed after the
machine eject signal was received (1000-sheet fin-
isher).
K
6110 DF paper entry sensor stay
jam
DF paper entry sensor (DFPES) is not turned off
within specified time of its turning on (4000-sheet
finisher).
K
6111 DF paper entry sensor (DFPES) is not turned off
within specified time of its turning on (1000-sheet
finisher).
K
6200 DF sub eject sensor non
arrival jam
DF sub eject sensor (DFSES) does not turn on
within specified time of DF paper entry sensor
(DFPES) turning on.
K
6210 DF sub eject sensor stay jam DF sub eject sensor (DFSES) is not turned off
within specified time of its turning on.
K
6300 DF middle eject sensor non
arrival jam
DF middle eject sensor (DFMES) does not turn on
within specified time of DF paper entry sensor
(DFPES) turning on (4000-sheet finisher).
K
6301 DF middle eject sensor (DFMES) does not turn on
within specified time of DF paper entry sensor
(DFPES) turning on (1000-sheet finisher).
K
6310 DF middle eject sensor stay
jam
DF middle eject sensor (DFMES) is not turned off
within specified time of its turning on (4000-sheet
finisher).
K
6311 DF middle eject sensor (DFMES) is not turned off
within specified time of its turning on (1000-sheet
finisher).
K
6400 DF tray upper surface sen-
sor non arrival jam
DF tray upper surface sensor (DFTUSS) does not
turn on within specified time of DF middle eject
sensor (DFMES) turning on (4000-sheet finisher).
K
6401 DF tray upper surface sensor (DFTUSS) does not
turn on within specified time of DF middle eject
sensor (DFMES) turning on (1000-sheet finisher).
K
6410 DF tray upper surface sen-
sor stay jam
DF tray upper surface sensor (DFTUSS) is not
turned off within specified time of its turning on
(4000-sheet finisher).
K
6411 DF tray upper surface sensor (DFTUSS) is not
turned off within specified time of its turning on
(1000-sheet finisher).
K
Code Contents Conditions
Jam
location*
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).