Kyocera TASKalfa 3050ci - Page 323

2LK/2LN/2LM/2LC-2
1-4-25
9004 DP switchback jam 2 DP registration sensor (DPRS) is not turned on
within specified time since original switchback
operation starts.
H
9005 No original feed 2 DP lift sensor 1 (DPLS1) does not turn on within
specified time of the lift plate rising.
H
9008 No original feed 3 DP CIS sensor (DPCS) does not turn on within
specified time of the paper feed starting.
H
9009
DP original conveying jam 2 Next feed original became the stand-by states of
paper feed while reading the image.
H
9010 Document processor open Document processor is opened during original
feeding.
H
9011 DP top cover open The DP top cover is opened during original feed-
ing.
H
9020 Original skew feed jam DP skew sensor (DPSS) does not turn on within
specified time of DP registration sensor (DPRS)
turning on.
H
9110 DP feed sensor stay jam DP feed sensor (DPFS) does not turn off within
specified time of DP timing sensor (DPTS) turning
on.
H
9200 DP registration sensor non
arrival jam
DP registration sensor (DPRS) does not turn on
within specified time of DP feed sensor (DPFS)
turning on.
H
9210 DP registration sensor stay
jam
DP registration sensor (DPRS) does not turn off
within specified time of DP timing sensor (DPTS)
turning on.
H
9300 DP CIS sensor non arrival
jam
DP CIS sensor (DPCS) does not turn on within
specified time of DP registration sensor (DPRS)
turning on.
H
9310 DP CIS sensor stay jam DP CIS sensor (DPCS) does not turn off within
specified time of DP registration sensor (DPRS)
turning off.
H
9400 DP timing sensor non arrival
jam
DP timing sensor (DPTS) does not turn on within
specified time of DP feed sensor (DPFS) turning
on.
H
9410 DP timing sensor stay jam DP timing sensor (DPTS) does not turn off within
specified time of DP feed sensor (DPFS) turning
off.
H
9500 DP switchback sensor non
arrival jam
DP switchback sensor (DPSBS) does not turn on
within specified time of DP timing sensor (DPTS)
turning on.
H
Code Contents Conditions
Jam
location*
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).