Kyocera TASKalfa 3050ci - Operation Panel

2LK/2LN/2LM/2LC-2
1-2-22
10. Open the controller lid.
11. Remove two screws.
12. Unhook six hooks and then remove the
left upper cover.
Figure 1-2-26
13. Release six wire saddles on the control-
ler box.
14. Remove the wire holder.
Figure 1-2-27
Screws
Controller lid
Left uppe
r
cover
Left upper cover
Hooks
Hooks
Hook
Wire holder
Wire saddle
Wire saddles
Wire saddle
Controller box
Wire saddle