2LK/2LN/2LM/2LC-2
1-2-23
15. Remove the following connectors that
connected to the main PWB from the
outside of the control box.
YC25
YC11
YC30
YC24
YC3 (FFC connector with a lock)
YC17 (BK)
YC21 (WH)
YC12
*: When removing the FFC from the FFC
connector with a lock, remove the FFC
after released by lifting up the lock lever
(see figure a).
*: When connecting the FFC that there is a
projection in the terminal both sides, lock
by knocking down the lock lever after
inserting the FFC to the connector until
both projections are hidden
(see figure b).
Figure 1-2-28
Controller box
[State of lock] [Lock release/FFC detaching]
Main PWB
Main PWB
[FFC connection/Lock]
a
b
1
Lock lever
Lock lever
FFC
2
2
Lock lever
FFC
YC25
YC11
YC30
YC24
YC3
YC12
YC21
YC17
FFC connector with a lock
1
Projection
Projection
To Next Page
Loading...
