2LK/2LN/2LM/2LC
1-5-50
7. Remove the following connectors that
connected to the main PWB from the
outside of the control box.
YC25
YC11
YC30
YC24
YC3 (FFC connector with a lock)
YC17 (BK)
YC21 (WH)
YC12
*: When removing the FFC from the FFC
connector with a lock, remove the FFC
after released by lifting up the lock lever
(see figure a and b).
*: When connecting the FFC that there is
a projection in the terminal both sides,
lock by knocking down the lock lever
after inserting the FFC to the connector
until both projections are hidden
(see figure c).
Figure 1-5-79
Controller box
[State of lock] [Lock release/FFC detaching]
[State of lock] [Lock release/FFC detaching]
Main PWB
Main PWB
[FFC connection/Lock]
a
b
c
1
1
FFC
Lock lever
Lock lever
2
Lock lever
Lock lever
FFC
2
2
Lock lever
FFC
YC25
YC11
YC30
YC24
YC3
YC12
YC21
YC17
FFC connector with a lock
1
Projection
Projection
To Next Page
Loading...
