2LK/2LN/2LM/2LC
1-5-64
13. Remove four connectors and two FFC
from the operation PWB.
*: When removing the FFC from the FFC
connector with a lock, remove the FFC
after released by lifting up the lock lever
(see page 1-5-50).
Figure 1-5-102
14. Remove four screws and then remove
the operation PWB.
15. Check or replace the operation PWB
and refit all the removed parts.
Figure 1-5-103
Connectors
FFC connector
with a lock
FFC
Operation PWB
Connectors
FFC
Operation PWB
Screws
Screw
Screw
To Next Page
Loading...
