2LK/2LN/2LM/2LC
2-3-23
YC10
12 TPD_TEMP_M I Analog Developer thermistor M detection sig-
nal
Connected to
front PWB
13 GND - - Ground
14 DRM_INDEX_C I 0/3.3 V DC DRM-C control signal
15 ERS_C O 0/24 V DC CL-C: On/Off
16 TPD_C_1 I Analog DEVPWB-C detection signal
17 DLP_VCONT_C_
1
O 0/3.3 V DC DEVPWB-C control signal
18 TPD_TEMP_C I Analog Developer thermistor C detection sig-
nal
19 GND - - Ground
20 TN_CLK O 0/3.3 V DC (pulse) Clock signal
21 GND - - Ground
22 EEP_SCL1 O 0/3.3 V DC (pulse) EEPROM clock signal
23 GND - - Ground
24 EEP_SDA1 I/O 0/3.3 V DC (pulse) EEPROM data signal
25 GND - - Ground
26 TPD_Y_1 I Analog DEVPWB-Y detection signal
27 DLP_VCONT_Y_
1
O 0/3.3 V DC DEVPWB-Y control signal
28 TPD_TEMP_Y I Analog Developer thermistor Y detection sig-
nal
29 ERS_Y O 0/24 V DC CL-Y: On/Off
30 DRM_INDEX_Y I 0/3.3 V DC DRM-Y control signal
31 FRONT_OPEN I 0/3.3 V DC FRCSW: On/Off
32 GND - - Ground
33 I2C_SCL O 0/3.3 V DC (pulse) EEPROM clock signal
34 GND - - Ground
35 I2C_SDA I/O 0/3.3 V DC (pulse) EEPROM data signal
36 GND - - Ground
37 LSU_FAN_REM O 0/24 V DC LSUFM: On/Off
38 CLEAN_MOT_LO
CK
I 0/3.3 V DC WTM lock signal
39 CLEAN_MOT_RE
M
O 0/24 V DC WTM: On/Off
40 GND - - Ground
Connector Pin Signal I/O Voltage Description
To Next Page
Loading...
