Kyocera TASKalfa 3050ci - Page 572

2LK/2LN/2LM/2LC
2-3-22
YC9
1 MOT_CLK O 0/3.3 V DC (pulse) MCPWB clock signal
Connected to
motor con-
trol PWB
2 MOT_SDO O 0/3.3 V DC (pulse) MCPWB serial communication data
signal
3 MOT_SEL O 0/3.3 V DC MCPWB select signal
4 MOT_SDI I 0/3.3 V DC (pulse) MCPWB serial communication data
signal
5 MOT_RDY I 0/3.3 V DC MCPWB ready signal
6 EMERGENCY O 0/3.3 V DC MCPWB control signal
7 BLT_SPEED O 0/3.3 V DC TBLS: On/Off
8 BLT_INDEX - - Not used
9 DRM_INDEX_BK O 0/3.3 V DC DRM-K control signal
10 DRM_INDEX_M O 0/3.3 V DC DRM-M control signal
11 DRM_INDEX_C O 0/3.3 V DC DRM-C control signal
12 DRM_INDEX_Y O 0/3.3 V DC DRM-Y control signal
13 GND - - Ground
14 GND - - Ground
15 +5V O 5 V DC 5 V DC power to MCPWB
16 +5V O 5 V DC 5 V DC power to MCPWB
17 BLT_BRAKE - - Not used
18 BLT_VM - - Not used
19 BLT_REM - - Not used
20 MOT_DATA_SET O 0/3.3 V DC MCPWB control signal
21 DRM_ON O 0/3.3 V DC MCPWB control signal
22 BLT_FG - - Not used
YC10
1 GND - - Ground
Connected to
front PWB
2 DRM_INDEX_Bk I 0/3.3 V DC DRM-K control signal
3 ERS_Bk O 0/24 V DC CL-K: On/Off
4 TPD_Bk_1 I Analog DEVPWB-K detection signal
5 DLP_VCONT_Bk
_1
O 0/3.3 V DC DEVPWB-K control signal
6 TPD_TEMP_Bk I Analog Developer thermistor K detection sig-
nal
7 GND - - Ground
8 DRM_INDEX_M I 0/3.3 V DC DRM-M control signal
9 ERS_M O 0/24 V DC CL-M: On/Off
10 TPD_M_1 I Analog DEVPWB-M detection signal
11 DLP_VCONT_M_
1
O 0/3.3 V DC DEVPWB-M control signal
Connector Pin Signal I/O Voltage Description