2LK/2LN/2LM/2LC
2-3-21
YC7
34 ROT_MOT_PD - - Not used
Connected to
front PWB
35 ROT_MOT_DIR - - Not used
36 ROT_HP_SENS - - Not used
37 THOP_MOT_Bk_
REM
- - Not used
38 THOP_MOT_M_R
EM
- - Not used
39 THOP_MOT_C_R
EM
- - Not used
40 THOP_MOT_Y_R
EM
- - Not used
41 GND - - Ground
42 ENCODE_ Bk - - Not used
43 ENCODE_M - - Not used
44 ENCODE_C - - Not used
45 ENCODE_Y - - Not used
46 THOP_ Bk - - Not used
47 THOP_M - - Not used
48 THOP_C - - Not used
49 THOP_Y - - Not used
50 GND - - Ground
YC8
1SGND -- Ground
Connected to
high voltage
PWB 2
2SGND -- Ground
3 SP_CNT O Analog Separation bias control voltage
4 T2_CNT O Analog Secondary transfer bias control volt-
age
5 SP_REM O 0/3.3 V DC Separation bias: On/Off
6 T_REM O 0/3.3 V DC Secondary transfer bias: On/Off
7 FB_CNT O 0/3.3 V DC Primary transfer cleaning bias: On/Off
8 T1_CNT_Bk O Analog Primary transfer bias K control volt-
age
9 T1_CNT_M O Analog Primary transfer bias M control volt-
age
10 T1_CNT_C O Analog Primary transfer bias C control volt-
age
11 T1_CNT_Y O Analog Primary transfer bias Y control volt-
age
12 T1_CLR_OFF_RE
M
O 0/3.3 V DC Primary transfer control signal
Connector Pin Signal I/O Voltage Description
To Next Page
Loading...
