2LK/2LN/2LM/2LC-2
2-3-58
YC2
23 GND - - Ground
Connected to
engine PWB
24 EEP_SDA1 I/O 0/3.3 V DC (pulse) EEPROM data signal
25 GND - - Ground
26 TPD_Y_1 O Analog DEVPWB-Y detection signal
27 DLP_VCONT_Y_
1
I 0/3.3 V DC DEVPWB-Y control signal
28 TPD_TEMP_Y O Analog Developer thermistor Y detection sig-
nal
29 ERS_Y_REM I 0/24 V DC CL-Y: On/Off
30 DRM_INDEX_ Y O 0/3.3 V DC DRM-Y control signal
31 FRONT_OPEN O 0/3.3 V DC FRCSW: On/Off
32 GND - - Ground
33 I2C_SCL I 0/3.3 V DC (pulse) EEPROM clock signal
34 GND - - Ground
35 I2C_SDA I/O 0/3.3 V DC (pulse) EEPROM data signal
36 GND - - Ground
37 LSU_FAN_REM I 0/24 V DC LSUFM: On/Off
38 CLEAN_MOT_LO
CK
O 0/3.3 V DC WTM lock signal
39 CLEAN_MOT_RE
M
I 0/24 V DC WTM: On/Off
40 GND - - Ground
YC3
1 GND - - Ground
Connected to
engine PWB
2 WTNR_SET - - Not used
3 INTER_LOCK - - Not used
4 IH_CORE_SENS - - Not used
5 IH_CORE_MOT_
REM
- - Not used
6 IH_CORE_CLK - - Not used
7 WTNR_LED I 0/3.3 V DC (pulse) WTS1 LED emitter signal
8 IH_COIL_FAN_AL
M
O 0/3.3 V DC FUFFM alarm signal
9 IH_COIL_FAN_H I 0/24 V DC FUFFM: On/Off
10 IH_COIL_FAN_L I 0/24 V DC FUFFM: On/Off
11 EXIT_FAN I 0/24 V DC EFFM: On/Off
12 CONTAIN_FAN - - Not used
13 JUNC_SOL_REM I 0/24 V DC FSSOL: On/Off (ACT)
14 JUNC_SOL_RET I 0/24 V DC FSSOL: On/Off (RET)
15 GND - - Ground
Connector Pin Signal I/O Voltage Description
To Next Page
Loading...
