2LK/2LN/2LM/2LC
2-3-84
YC10
1 LOOP_SENS I 0/3.3 V DC LPS: On/Off
Connected to
loop sensor
2 GND - - Ground
3 5V O 5 V DC 5 V DC power to LPS
4 3.3V - - Not used
5 REG_BK_LED - - Not used
6 GND - - Not used
7 REG_BK_SENS1
_P
- - Not used
8 REG_BK_SENS1
_S
- - Not used
9 GND - - Not used
10 BELT_JAM_SENS - - Not used
11 5V - - Not used
YC11
1 GND - - Ground
Connected to
duplex sen-
sor 1, eject
fan motor
and duplex
clutch 1
2 DU_ENTER_SEN
S
I 0/3.3 V DC DUS1: On/Off
3 5V O 5 V DC 5 V DC power to DUS1
4 EXIT_FAN_REM O 0/24 V DC EFM1: On/Off
5 24V2 O 24 V DC 24 V DC power to EFM1
6 EXIT_FAN_REM O 0/24 V DC EFM2: On/Off
7 24V2 O 24 V DC 24 V DC power to EFM2
8 24V2 O 24 V DC 24 V DC power to DUCL1
9 DU_CL_UPPER_
REM
O 0/24 V DC DUCL1: On/Off
YC12
1 GND - - Ground
Connected to
feed PWB 1
2 GND - - Ground
3 MPF_TABLE O 0/3.3 V DC MPTSW: On/Off
4 MPF_WID1 O 0/3.3 V DC MPPWSW: On/Off
5 MPF_WID2 O 0/3.3 V DC MPPWSW: On/Off
6 MPF_WID3 O 0/3.3 V DC MPPWSW: On/Off
7 MPF_LNG O 0/3.3 V DC MPPLSW: On/Off
8 LED_3.3V3 I 3.3 V DC 3.3 V DC power from FPWB1
9 MPF_PPR_SET O 0/3.3 V DC MPPS: On/Off
10 MPF_LIFT_UP_S
ENS
O 0/3.3 V DC MPLS1: On/Off
11 MPF_LIFT_DOW
N_SENS
O 0/3.3 V DC MPLS2: On/Off
12 MPF_JAM_SENS O 0/3.3 V DC MPFS: On/Off
Connector Pin Signal I/O Voltage Description
To Next Page
Loading...
