Kyocera TASKalfa 3050ci - Page 635

2LK/2LN/2LM/2LC-2
2-3-85
YC12
13 MPF_CL_REM I 0/24 V DC MPPFCL: On/Off
Connected to
feed PWB 1
14 24V2 I 24 V DC 24 V DC power from FPWB1
15 MPF_LIFT_MOT_
A
I 0/24 V DC MPLM: On/Off
16 MPF_LIFT_MOT_
B
I 0/24 V DC MPLM: On/Off
17 TC_TONER_MOT
_A
- - Not used
18 TC_TONER_MOT
_B
- - Not used
19 TC_TONER_FUL
L
- - Not used
20 TC_TONER_LED - - Not used
YC13
1 3.3V I 3.3 V DC 3.3 V DC power from FPWB1
Connected to
feed PWB 1
2 LOOP_SENS O 0/3.3 V DC LPS: On/Off
3 EDGE_FAN_REM I 0/24 V DC FUFM: On/Off
4 DU1_A I 0/24 V DC (pulse) DUM1 drive control signal
5 DU1_B I 0/24 V DC (pulse) DUM1 drive control signal
6 DU1_A/ I 0/24 V DC (pulse) DUM1 drive control signal
7 DU1_B/ I 0/24 V DC (pulse) DUM1 drive control signal
8 GND - - Ground
9 DU_CL_UPPER_
REM
I 0/24 V DC DUCL1: On/Off
10 24V2 I 24 V DC 24 V DC power from FPWB1
11 EXIT_FAN I 0/24 V DC EFM: On/Off
12 DU_ENTER_SEN
S
O 0/3.3 V DC DUS1: On/Off
YC14
1 GND - - Ground
Connected to
transfer
release sen-
sor and
transfer
release
motor
2 PRESS_RLS_SE
NS
I 0/3.3 V DC TRRS: On/Off
3 5V O 5 V DC 5 V DC power to TRRS
4 PRESS_RLS_RE
M1
O 0/24 V DC TRRM: On/Off
5 PRESS_RLS_RE
M2
O 0/24 V DC TRRM: On/Off
6 NC - - Not used
Connector Pin Signal I/O Voltage Description